HOW TO USE
Special application instructions for Marble paints: After you have cleaned your work and applied Stick Tight, then you will want to apply Quick Coat.
STICK TIGHT:
Surface Prep: All surfaces must be clean and free of dust or oil before application.
DIRECTIONS: Use a soft cloth or brush to apply. Continuously scrub in Stick Tight to the surface to ensure good coverage. Do not let the solution dry, rinse thoroughly with clean water, making sure to remove all of the solution.
QUICK COAT:
Apply a very thin layer of Quick Coat to your work with a brush or your gloved finger. After the first layer is dry to the touch, apply a second layer in the same fashion as the first.
Make certain Quick Coat is completely dry before applying resin. You can use a dryer or heat gun to speed up this process.