Quick Coat- 8oz bottle

Apply a very thin layer of Quick Coat to your work with a brush or your gloved finger.  After the first layer is dry to the touch, apply a second layer in the same fashion as the first.

Make certain Quick Coat is completely dry before applying resin.  You can use a dryer or heat gun to speed up this process.

HOW TO USE

Surface Prep:  All surfaces must be clean and free of dust or oil before application.  To remove grease or oil, use a kitchen degreaser then wipe with acetone.  For metal application, clean with acetone then apply CCDIY Stick Tight to increase adhesion.  For 3D Crete clean loose dust with a brush before application.

Directions:  Use a foam or soft bristle brush to apply a thin layer to your work.  Allow Quick Coat to dry to the touch before applying another coat, if needed.  Use a fan or heat gun to speed up the dry time, if necessary.